← All systems
GMP-CLAM8 · Rev C · Mid-volume
2×4 Eight-Tray Clamshell
Two-part 2×4 clamshell for eight trays. Every tray has wall access — no buried trays.
Engineering development — samples by request
Loading 3D model…
0%
Drag to rotate · scroll/pinch to zoom · right-drag to pan · click a part
The tray
One tray. Every format.
The same 5 × 5 cone tray fits 1:1 in every CONEPAK pack — single, 4, 9, 16 and 24-tray. 25 stacks of 8 cones, 200 per tray.
- 70 × 70
- mm footprint
- 45 mm
- tray height
- 200
- cones
Drag to rotate · scroll to zoom
Engineered for production
Top view
mm · overall outside · height 311
Specification
- Tray quantity
- 8 (2 × 4)
- Tray
- 70 × 70 × 45 mm nominal · cell 72 × 72 · pitch 78
- Outside envelope
- 202.2 × 358.2 × 311 mm
- Base interior at floor
- 150 × 306 mm
- Dome roof interior
- 164 × 320 mm
- Interior height
- 305 mm (+2/−0) floor to roof underside
- Dome draw
- 1.43 : 1 H:W · ADR 5.09
- Base material
- Black RPET, NIR-detectable / black PP
- Base process
- Vacuum or pressure thermoform
- Stacking
- Ship in corrugated cases — case carries load. 1.5:1 tall-to-wide, no free stacking.
- Nesting
- 2° draft per side. Base pitch ~22–25 mm. Stack lugs set pitch; air-break bumps prevent vacuum lock.
- Palletization
- 48 × 40 in · 15 per layer · 4 layers · 60 per pallet · 1384 mm load height
- Cone capacity
- 1,600 cones (8 × 200 per tray · 25 stacks of 8 in a 5 × 5 grid)
- Packaging weight
- Contact Engineering
Dome manufacturing routes
Process chosen by volume.
Under ~10k
Clear APET/RPET
Folded die-cut sleeve
Low tooling
~10k–50k
Clear PETG
Heavy-gauge pressure form + plug assist
Marginal — trial gate
Over ~50k
Clear PETG / copolyester
Injection mold, multi-cavity possible
Most robust
Volume breakpoints are planning assumptions, not costed.