← All systems
GMP-CLAM16 · Rev C · Bulk
4×4 Sixteen-Tray Clamshell
4×4 clamshell for sixteen trays. Fully thermoformable, between the 9-tray and 24-tray.
Engineering development — samples by request
Loading 3D model…
0%
Drag to rotate · scroll/pinch to zoom · right-drag to pan · click a part
The tray
One tray. Every format.
The same 5 × 5 cone tray fits 1:1 in every CONEPAK pack — single, 4, 9, 16 and 24-tray. 25 stacks of 8 cones, 200 per tray.
- 70 × 70
- mm footprint
- 45 mm
- tray height
- 200
- cones
Drag to rotate · scroll to zoom
Engineered for production
Top view
mm · overall outside · height 311
Specification
- Tray quantity
- 16 (4 × 4)
- Tray
- 70 × 70 × 45 mm nominal · cell 72 × 72 · pitch 78
- Outside envelope
- 358.2 × 358.2 × 311 mm
- Base interior at floor
- 306 × 306 mm
- Dome roof interior
- 320 × 320 mm
- Interior height
- 305 mm (+2/−0) floor to roof underside
- Dome draw
- 0.77 : 1 H:W · ADR 3.89
- Base material
- Black RPET, NIR-detectable / black HIPS
- Base process
- Vacuum or pressure thermoform
- Stacking
- Stack inside corrugated cases; case carries load. 2-high free stack subject to compression test.
- Nesting
- 2° draft per side. Base pitch ~22–25 mm. Stack lugs set pitch; air-break bumps prevent vacuum lock.
- Palletization
- Contact Engineering
- Cone capacity
- 3,200 cones (16 × 200 per tray · 25 stacks of 8 in a 5 × 5 grid)
- Packaging weight
- Contact Engineering
Dome manufacturing routes
Process chosen by volume.
Production
Clear APET/RPET / PETG
Plug-assisted pressure form — forming trial + thickness map
Feasible — trial
Volume breakpoints are planning assumptions, not costed.