← All systems
GMP-CLAM24 · Rev C · Bulk
4×6 Twenty-Four-Tray Clamshell
Bulk 4×6 clamshell for twenty-four trays. Fully thermoformable — built for volume.
Engineering development — samples by request
Loading 3D model…
0%
Drag to rotate · scroll/pinch to zoom · right-drag to pan · click a part
The tray
One tray. Every format.
The same 5 × 5 cone tray fits 1:1 in every CONEPAK pack — single, 4, 9, 16 and 24-tray. 25 stacks of 8 cones, 200 per tray.
- 70 × 70
- mm footprint
- 45 mm
- tray height
- 200
- cones
Drag to rotate · scroll to zoom
Engineered for production
Top view
mm · overall outside · height 311
Specification
- Tray quantity
- 24 (4 × 6)
- Tray
- 70 × 70 × 45 mm nominal · cell 72 × 72 · pitch 78
- Outside envelope
- 358.2 × 514.2 × 311 mm
- Base interior at floor
- 306 × 462 mm
- Dome roof interior
- 320 × 476 mm
- Interior height
- 305 mm (+2/−0) floor to roof underside
- Dome draw
- 0.77 : 1 H:W · ADR 3.45
- Base material
- Black RPET, NIR-detectable / black HIPS
- Base process
- Vacuum or pressure thermoform
- Stacking
- Wide and stable. 2-high free stack subject to compression test.
- Nesting
- 2° draft per side. Base pitch ~22–25 mm. Stack lugs set pitch; air-break bumps prevent vacuum lock.
- Palletization
- 48 × 40 in · 4 per layer · 4 layers · 16 per pallet · 1384 mm load height
- Cone capacity
- 4,800 cones (24 × 200 per tray · 25 stacks of 8 in a 5 × 5 grid)
- Packaging weight
- Contact Engineering
Dome manufacturing routes
Process chosen by volume.
Production
Clear APET/RPET / PETG
Pressure form, female tool, plug assist
Feasible — trial
Volume breakpoints are planning assumptions, not costed.